Office Furniture
Office Furniture Manufacturer in Bengaluru
Office furniture manufacturer in Bengaluru — desks, conference tables, reception counters, storage and seating for a complete fit-out from one workshop.
Manufactured at our own unit in #336/10, Hosur Road, near ICICI Bank, Bommanahalli, Bengaluru — no reseller markup.
A complete office furniture range from one workshop
Most offices are furnished in pieces. Desks from one supplier, chairs from another, a reception counter from a carpenter, storage bought later when the paperwork starts piling up. The result works, but it never quite looks like it was planned.
As a direct office furniture manufacturer in Bengaluru, we make the whole range at our own Bommanahalli workshop, which means an office can be furnished from one place in one finish family: workstations and desks, conference and meeting tables, reception and billing counters, storage and filing, side tables, and seating. One drawing, one delivery schedule, one point of contact when something needs changing — and no reseller markup between the workshop and your floor.
Our office furniture ranges
Desks and workstations
Open-plan desking, screened cubicles, corner desks and manager desks. Sized to your floor plate rather than to a catalogue.
Conference tables
Rectangular, oval and boat-shaped tables in sizes from four-seat huddle rooms to full boardrooms. Power, data and cable cut-outs are built in where AV is involved — a boardroom table with cables draped over the edge undoes a lot of expensive design. A frequent request from the corporate offices we fit out around Indiranagar and Koramangala.
Reception and billing counters
The first piece of furniture a visitor meets. Built to the entrance dimensions, with a working side that has real storage and a public side that hides it.
Storage and filing
Filing cabinets, mobile pedestals, side and credenza units, overhead storage, and full-height cupboards. Lockable where required — the kind of practical storage the growing practices around Banashankari and JP Nagar tend to under-order and then come back for.
Side tables and occasional furniture
Cabin side tables, printer stands and pantry units, built in the same finishes so they never read as afterthoughts.
Seating
Executive, task, mesh, visitor and conference chairs, supplied alongside the desks they belong with.
Specifying an office fit-out
- Do the whole floor at once, on paper. Even if you buy in phases, plan the complete scheme first. It costs nothing and it is the only way the phases will match.
- Decide the finish family early. Two laminates and one powder-coat colour, used consistently, make a modest fit-out look considered. Six finishes make an expensive one look chaotic.
- Meeting rooms need power. Decide the AV and power arrangement before the table is manufactured.
- Storage is always underestimated. Count what the team currently stores, then add for growth. Retrofitting storage into a finished floor is the most common second purchase we are asked for.
- Reception sets the tone. It is a small proportion of the budget and a large proportion of the impression. Spend proportionately.
- Circulation and exits. Aisle widths and clear routes to exits should be confirmed against the actual floor plan, not the marketing plan.
Materials and finishes
Metal understructures, frames and storage carcasses are fabricated in mild steel section, welded and powder coated. Work surfaces and panel components are laminate over an engineered core, edge-banded on all exposed edges. Screens are available in fabric-covered, laminate and glazed panels. Seating is supplied in fabric, mesh and leatherette.
Finishes can be matched to a brand palette or an architect’s specification. Because everything is made in one workshop, matching across desks, storage and counters is a manufacturing decision rather than a hopeful coincidence.
Who this suits
Corporate offices, IT floors, industrial and factory administration areas, government offices, professional practices, coworking operators and startups. We have delivered office furniture projects for clients including Tata Motors Finance, the Monarch Ramani IT project, and UB City.
Made in our Bommanahalli workshop, installed across Bengaluru from Electronic City to Whitefield, and delivered to clients across India.
Customisation
Sizes, finishes, storage configuration and layout are set per project. We work from your floor plan, measure on site, manufacture in our own workshop and install with our own team. That last part matters more than it sounds — when the manufacturer installs, there is nobody to blame for a fit problem, so fit problems get solved rather than argued about.
For phased fit-outs we keep the specification on record so that the furniture bought next year matches the furniture bought this year.
Start a project
Send us your floor plan, headcount and a note on what the space needs to do. We will come back with a scheme and a quote.
Sri Ranga Interior Modular Furnitures #336/10, Hosur Road, near ICICI Bank, Bommanahalli, Bengaluru 560068 Phone: +91 98807 93666 · Email: info@srirangainterior.com
See the full office furniture range or every product we make.
